
The cost of timber fell slightly at the beginning of 2026, but hold on tight. In light of rising housing demand, struggling local mills, and shifting international markets, this window of opportunity is unlikely to remain open indefinitely. Here’s what builders in Melbourne should be aware of regarding 2026 timber price trends.
Let’s be honest – if you’ve spent any real time on a construction site lately, you’ve probably done a double-take at a timber quote or two. Prices went haywire after COVID.
But 2026 is actually not a bad time to be buying timber, if you know what you’re looking at. At Australian Treated Pine, we’ve been supplying Melbourne’s builders, tradies, and landscapers for over 30 years.
We’ve watched the market move through every kind of cycle, and right now, there’s a real opportunity for those who plan ahead. Here’s what the current timber price trends look like, what’s driving them, and how smart builders are staying one step ahead.
What’s Happening With Timber Prices Right Now?
Timber, boards, and joinery prices declined during the March quarter of 2026, which comes at an excellent time, given that building construction prices had increased by 3.7% over one year, up to February 2026, the highest increase in a long time. The increase in labour, copper, and concrete prices has been more intense than that of timber prices.
That said, timber prices aren’t completely settled. IBIS World forecasts a modest 1.9% rise in domestic timber prices through 2025–26, supported by a genuine uptick in housing activity following the RBA’s rate cuts. Detached house starts lifted 6.3% and semi-detached dwellings jumped 11.7% between December 2024 and March 2025 – real demand flowing back into the market.
The relative calm on timber pricing won’t necessarily last. Now is a good time to lock in supply arrangements and get ahead of projects, rather than waiting until the market tightens again.
What’s Actually Moving the Price?
Significant factors affecting the cost of timber builders will pay in 2026 are:
Housing construction activity is the biggest driver. When housing starts climb, the demand for structural timber, decking, fencing, and landscaping timber products climbs with it. Supply chains don’t always keep up, and that’s when prices spike. We all remember 2021 and 2022 well enough.
Fuel and freight quietly add up. Getting timber from the plantation to the site costs money, and a rise in diesel prices works its way through the supply chain eventually. It’s not always obvious in the per-metre price, but it’s there.
Plantation harvest cycles run on their own timeline. When timber volumes are high, prices soften. When harvests tighten, processors compete for stock and prices rise. This slow-moving cycle underpins a lot of the price movement that builders experience at ground level.
Bushfires and extreme weather can shift supply quickly in certain regions. It’s not a constant factor, but when it hits, it hits fast – and regional price pressures ripple outward.
The Supply Chain Is Still a Risk
The COVID-era supply chain chaos pushed timber prices to levels none of us had seen before. Things have stabilised since then, but the supply chain is not something you can simply stop thinking about.
Global shipping costs, port congestion, and freight availability all feed into what imported timber products cost. When something disrupts the chain – whether it’s a trade dispute, a natural disaster, or a spike in global demand and the prices move fast, local stock disappears quickly.
For any substantial project, supply chain reliability matters as much as the invoice price. A slightly higher cost per metre from a local supplier who actually has the stock and can deliver on time is nearly always better value than a cheaper quote attached to a six-week lead time and a project delay. This is exactly why Melbourne builders with regular workloads keep trade accounts with reliable local suppliers – because when a job is running, you cannot afford to be chasing timber.
Demand vs Supply: The Gap That Builders Should Watch
Australia has set a national housing target of 1.2 million new homes over five years. Completions are well short of that goal right now, but the push to lift construction volumes is real and it will drive demand for timber products higher as the pipeline builds.
At the same time, domestic timber mills are under pressure. Imported timber, particularly lower-grade products from China, has been landing in Australia at roughly half the price of locally produced timber. Some Australian mills have already scaled back production in response. That creates a supply-side risk that isn’t obvious today but could become very real when housing demand accelerates.
Trends in timber prices look reasonably manageable right now, but could shift considerably over the next 12 to 18 months. Builders who get ahead of that by securing supplier relationships and forward-ordering, where possible. This will be in a much stronger position than those who leave it to chance.
What Global Markets Have to Do With Your Timber Bill
Australia doesn’t set its own timber prices in a bubble. What happens overseas matters.
There is an increase in price pressure for softwood lumber in the US market due to rising housing construction and trade duties placed on softwood imports from Canada. Australia obtains its timber from Southeast Asia and not North America; however, there are still price indicators for global cargo shipping.
China is the most direct influence on Australian timber imports. When Chinese construction slows, surplus timber gets redirected to markets like ours at competitive prices – which is part of what’s kept import costs low recently. When China’s construction sector picks back up, that tap can turn off quickly, and Australian builders who relied on cheap imports will feel it.
Local vs Imported Timber: It’s More Than Just the Price Tag
Imported timber can look attractive on paper. But for most applications, Australian builders handle decking, fencing, retaining walls, and posts and the comparison goes deeper than the per-metre cost.
Locally produced timber meets Australian Standards for treatment classification. Our treated pine at Australian Treated Pine is processed using CCA (Chromated Copper Arsenate) for heavy-duty in-ground applications, and ACQ (Alkaline Copper Quaternary) for residential decking and outdoor structures. These treatments are specified to perform in Australian conditions, not just to meet the minimum threshold for import.
In the case of Melbourne decking construction, this is particularly important. The weather conditions in Melbourne are truly harsh on timber outdoors with significant temperature swings, rainy winters, and hot summers. Only properly treated and correctly classified local pine will ensure the deck remains attractive for 10 years. Poor quality, cheaper imported material that wasn’t properly treated will begin to fail after several seasons, and the builder will be called upon.
How Builders Are Keeping Costs Under Control
The best builders in 2026 aren’t just chasing the lowest price; they’re managing cost and risk together. A few things that consistently make a difference:
Set up a trade account with a local supplier you trust. Consistent access to stock, transparent pricing, and people who can actually answer your questions remove the guesswork and the surprises. A trade account with Australian Treated Pine does exactly that.
Order ahead of your schedule. With regard to timber decking, fence work, and any landscaping work, ordering in advance ensures you are protected against stock shortages and price increases. We will be happy to keep the product aside for you should you contact us.
Get the treatment class right from the start. Whether it’s H2, H3, H4, or H5, specifying correctly means you’re not over-spending on unnecessary treatment or under-specifying and creating a liability down the track. Our team can help you work through the right choice for each application.
Build a supplier relationship, not just a transaction. When stock gets tight, it’s the long-term customers who get looked after. That’s just the reality of how it works.
Let’s Talk About Your Next Project
At Australian Treated Pine, we’ve been part of Melbourne’s construction community for more than 30 years. Our six-acre facility in Melbourne’s northern suburbs houses Melbourne’s largest fully automated timber preservation facility. We control quality from treatment through to delivery, and we can move when your project needs us to.
Give us a call. Let’s sort out your next job together.
FAQs
Why do timber prices fluctuate in the construction industry?
Honestly, it comes down to a mix of things such as how busy the housing market is, what diesel costs, how plantation harvests are running, and what’s happening globally. When building activity picks up fast, demand outruns supply pretty quickly, and prices follow. When things slow down, they ease back off.
How do supply chain disruptions affect timber costs?
When ships are delayed, ports are congested, or global events throw a spanner in the works, imported timber gets expensive or just disappears from shelves altogether. Local stock gets snapped up fast, prices climb, and suddenly that cheap overseas quote looks a lot less attractive. Local suppliers become worth their weight in gold.
Is timber becoming more expensive for builders?
Timber actually dipped in early 2026, which is a bit of a relief. That said, a modest rise is on the cards as housing picks up again. Enjoy the breathing room while it’s there, but don’t bank on it sticking around forever.
What is the impact of imported timber on local prices?
Imports of timber at cheap rates, especially those coming from China, are posing challenges for the local milling industry. Short term, that keeps prices down. Long term, it’s a bit of a worry. And imported timber doesn’t always meet Australian Standards, which can come back to bite you on site.
How can builders manage rising timber costs?
Establish a trading account with a reputable supplier, place your order before you need the lumber, and ensure you choose the right class of treatment from the start. It is important not to go for the lowest quotation, but also consider reliability and personal relationships as well.
Are timber prices expected to increase in the future?
Yeah, gradually. A rise of around 1.9% is forecast through 2025–26, and if housing demand keeps building while domestic mills keep pulling back, things could tighten up further down the track. Getting your supplier relationships sorted now is a smart move before the market shifts on you.
What factors influence timber supply and demand?
Housing construction activity is the big one, but plantation harvest cycles, fuel costs, bushfires, and what’s happening in global markets all play a role too. China’s construction activity is particularly worth watching – when it slows, cheaper timber flows our way. When it picks back up, that changes fast.
Is engineered timber more cost-effective than traditional timber?
Depends on the job. For big structural spans, engineered timber can be the smarter call. But for everyday decking, fencing, landscaping, and general construction work, quality treated pine is tough to beat on price and durability. It’s been the go-to for Aussie builders for decades and for a good reason.
How can builders secure better deals from timber suppliers?
Set up a trade account, build a genuine relationship with your supplier, and don’t leave ordering to the last minute. When stock gets tight, the customers who’ve been around a while get looked after first. Know your treatment classes too, specifying right the first time saves money and headaches down the track.
