No products in the cart.
Choosing bollards for a car park, driveway or boundary starts with one question: what will it cost? Prices have moved since 2021, and the pole is only part of the bill. This guide covers timber bollard prices in 2026, how treated pine holds up in the ground, when a removable sleeve beats a retractable system, and which Australian standards to check. If you plan to buy bollards online or compare bollards Melbourne suppliers, you will know what to ask first.
Key takeaways
- Price range (2026): domed timber bollards from $35.84; galvanised sleeves from $395; complete removable setups from about $430 (before installation). Custom bollards are quoted online.
- Best type per use: fixed domed bollards for permanent barriers (car parks, frontages, loading zones), removable bollards with sleeves for occasional access (driveways, laneways, events), custom bollards for specific sizes or aesthetics.
- Standards to check: AS/NZS 2890.1 (parking layout), AS 2890.6 (accessible bays), AS 1428.1 (accessible paths), and AS/NZS 1604.1 (timber treatment – use H4 for in‑ground bollards).
A basic domed bollard costs from about $35.84. A removable setup with a galvanised sleeve starts from about $430. Size, treatment and fixing method drive the price. Treated pine domed bollards suit car parks, driveways and boundaries, and fit removable sleeves for flexible access.
Best Bollard Types for Commercial Use in Australia
The best bollard type depends on how often you need access. For car park edges and building frontages, fixed timber bollards act like permanent barriers. Removable bollards suit driveways, loading bays and laneways where vehicles sometimes need to pass through.
Timber Bollards: Domed, Custom and Fixed Options
- Domed bollards: round poles in 1.2 m, 1.5 m, 1.8 m and 2.4 m lengths
- Diameters: 125 mm, 150 mm and 200 mm
- Custom bollards: domed or square, in treated pine or cypress pine
- Treatment: H4, with CCA or ACQ preservative
Removable Bollards with Galvanised Sleeves for Flexible Access
- A galvanised sleeve sits in the ground, and the bollard lifts out when you need access.
- Sleeves come in 125 mm, 150 mm and 200 mm sizes, round or square.
- They hold timber and concrete bollards.
- Mainly used for driveways, service lanes and event access.
How Durable Are Timber Bollards? Treated Pine vs Other Materials
Treated pine bollards resist rot, termites and decay when you match the treatment to the site. H4 treatment suits in-ground use. Steel and concrete resist impact better, but timber costs less and is easy to cut, replace and repaint. AT Pine timber is treated to the Australian standard (AS 1604.1) and built to last 30-40 years. ACQ orders are custom, so allow extra time.
Treated Pine Bollards: CCA vs ACQ Treatment and Lifespan
| Feature | CCA | ACQ |
|---|---|---|
| Full name | Chromated copper arsenate | Alkaline copper quaternary |
| Protects from | Decay and termites | Decay and termites |
| Regulations | APVMA restricts its use where close human contact is a risk. | An alternative to CCA-treated timber. |
| Uses | Fence lattices, verandah posts, farm fencing and building timber | Garden furniture, picnic tables, domestic decking and play equipment |
Ground Contact and Maintenance Tips for Timber Bollards
- Ground contact: use H4 timber for any part in or on the ground.
- Cut ends: seal any cut or drilled end, because cutting exposes untreated wood.
- Yearly check: look for cracks, movement and soft spots at ground level.
Timber Bollard Prices in Australia: Cost by Model and Size
| Product | Option | Price (AUD) |
|---|---|---|
| Domed Bollard | 1.2 to 2.4 m long 125 to 200 mm wide | From $35.84 |
| Custom Bollard | Domed, square, treated or cypress pine | Online Quote |
| Galvanised Sleeve | 125, 150 or 200 mm, 300 mm long | From $395 |
What Affects the Price?
The price of a timber bollard is affected by different factors such as:
- Size: longer, thicker poles use more timber.
- Treatment: ACQ is a custom order, so confirm price and timing.
- Sleeves: a removable setup adds the sleeve cost.
- Delivery: door delivery or click and collect.
- Installation: footings, concrete and labour cost extra.
Retractable Bollard Cost for Driveways vs Timber Alternatives
A removable timber bollard setup starts at about $430, before installation. Retractable bollards lower into the ground, and suppliers quote them by the job. Removable timber bollards give driveway control without a mechanism or power, blocking vehicles for a fraction of the cost.
Retractable vs Removable Bollards for Driveways
| Feature | Removable Bollard | Retractable Bollard |
|---|---|---|
| How it works | Lifts out of a galvanised sleeve | Lowers into the ground, manually or automatically |
| Power needed | No | Yes, for automatic models |
| Moving parts | No | Yes |
| Price | Lower upfront cost $395 for the sleeve; domed bollard from $35.84 | Higher upfront cost Quoted on a job-by-job basis |
When to Choose a Removable Timber Bollard?
- Access is occasional, such as deliveries, events or maintenance.
- You need to block cars, not stop a vehicle at speed.
- You want a lower upfront cost with no servicing.
How to Choose the Right Bollards for Parking Areas
Choose bollards by purpose, height and position. Decide whether you need to block vehicles, mark a boundary or protect a wall. Then check height, spacing and visibility rules with your certifier before you order.
Car Parks, Entrances and Loading Zones
| Site | Job | Suggested Type |
|---|---|---|
| Car park edge or wall | Stop bumper hits | Fixed domed bollard |
| Driveway or laneway | Allow occasional access | Removable bollard |
| Loading zone | Protect doors and walkways | Fixed bollard in a row |
| Boundary or path | Mark the line | Domed or custom bollard |
Footings, Embedment Depth and Site Preparation
- Call Dial Before You Dig on 1100 before you dig.
- Match the sleeve size to your bollard diameter.
- Sleeves are 300 mm long, so plan footing depth with your installer.
- Fixed bollards need depth based on height and soil, so ask an installer.
- AT Pine supplies the bollards and sleeves. A landscaper or concreter can install bollards in Melbourne.
Australian Standards for Pedestrian Safety Bollards
No single standard covers every bollard. Car park layout follows AS/NZS 2890.1 and accessible bays follow AS 2890.6, while timber treatment follows AS/NZS 1604.1 and accessible paths follow AS 1428.1. Your certifier confirms what applies to your site.
Standards for Parking Areas, Visibility and Accessibility
| Standard | Covers | Why It Matters |
|---|---|---|
| AS/NZS 2890.1 | Off-street parking | Layout, barriers and bay-end visibility |
| AS 2890.6 | Off-street parking for people with disabilities | Sets bollard height and position in the shared area beside accessible bays |
| AS 1428.1 | Access and mobility in new building work | Clear, accessible paths for travel |
Timber Treatment Standards and Hazard Classes for In-Ground Use
- AS/NZS 1604 is a series of five standards on preservative treatment.
- H3 timber suits outdoor use above ground, not ground contact.
- H4 timber suits in or on the ground with severe wetting, and protects against insects, termites and severe decay.
- AT Pine domed and custom bollards are treated to H4.
- Look for the treatment brand on treated pine. Its hazard class (H4 for ground contact) shows where you can use the timber.
How to Compare Bollard Prices from Different Suppliers in Melbourne
Compare the full cost, not just the unit price. Ask each supplier what the quote includes, such as sleeves, treatment, delivery, etc. Then check the hazard class, size and lead time.
What to Consider Before You Buy Bollard
Consider the impact risk, vehicle speed, ground conditions and finished height. Timber bollards suit boundaries, marker lines and low-speed vehicle control. They are not crash-rated barriers, so high-risk sites need engineered security bollards.
What a Bollard Quote Should Include
- Size: length, diameter and shape.
- Timber and treatment: hazard class and CCA or ACQ.
- Sleeves, fixings and any extras.
- Delivery method, cost, etc.
- Stock status and lead time.
Need a price for your site? Browse AT Pine timber bollards in Melbourne, or request a custom quote online.
FAQs
1. Can I order bollards online with delivery in Australia?
Yes. AT Pine sells domed bollards and galvanised sleeves online, with door delivery or click and collect. Custom bollards go through an online quote. Metro Melbourne deliveries go to the kerbside. Call us for delivery outside Melbourne.
2. How long does it take to get bollards delivered after purchase?
For most standard items, under 24 hours. But custom orders need more time and can take anywhere between 7-10 days.
3. How to install bollards after purchase?
AT Pine supplies bollards and sleeves, and cuts bollards to length before dispatch. Dial Before You Dig on 1100 first. Then call a landscaper or concreter to install them. Share the bollard diameter and 300 mm sleeve length.
4. What are the best durable bollards?
H4 treated pine suits most car parks, driveways and boundaries. It resists rot and termites in the ground, costs less than steel or concrete, and is easy to cut and replace. Sites with fast traffic should run a traffic risk assessment.
5. How much does a timber bollard cost?
A domed timber bollard at Atpine starts from $35.84. A galvanised sleeve for a removable setup starts from $395, so the set costs from about $430. Custom bollards are quoted online. Size, treatment and delivery change the final price.
