Pre Fab stairs are a very simple way of meeting your external stairway requirements. Building a staircase to suit your needs can be tricky even for an experienced builder. Meeting both building code regulations, making the stairs fit the application, and also getting your stairs to work (that is, to be comfortable to walk up and down) are all challenges that have been simplified with our range of prefabricated stairs.

Stairs come in either prefabricated form or alternatively Kit form. All stairs are manufactured from F7 Kiln dried Rougher Header treated pine, treated to H3 (please refer to technical information on this website for further information on hazard levels) for external out door use.

Stock Stair case width is 990mm, with 160mm rises. (Distance between treads). Other configurations are available, price on application.
Note: All non stock – standard pre fab stairs must be paid for at the time of ordering and are a non refundable item.

Please refer to the table below for “deck to ground” height requirements. Please ask us for a copy of our brochure on stairs for assistance in measuring up for your requirements

No. of Treads	Deck to ground height MM
1	320
2	480
3	640
4	800
5	960
6	1120
7	1280
8	1440
9	1600
10	1760
11	1920
12	2080
13	2240
14	2400
15	2560
16	2720
17	2880

Dog Kennels are available in six different sizes. All dog kennels stocked at Australian Treated Pine are built to the highest standard, with the following features:

Zinc roof with barge capping, internal ceiling for your pets comfort, durable plywood floor, and elevation stumps to keep the structure off any cold surfaces and to prevent weather form entering. All kennels are constructed from H3 treated pine. (Please refer to technical information page of this website for further information on Hazard levels).

Please refer to the Table below for available dimensions.

	Length mm	Width mm	Height mm
Small	610	475	550
Medium-small	710	610	610
Medium	915	660	735
Medium- Large	915	660	790
Large	1200	710	865
X-Large	1200	915	1050