Park Post and Rail Sets consist of a combination of two vertical posts which are scalloped and drilled, used in conjunction with a horizontal rail of the same diameter to form a defining barrier. These sets are manufactured using rural round poles of various diameters, however are also available in perfectly rounded poles.

Typical applications include barriers around parks and gardens, defining car park spaces where lines cannot be marked, use as a barrier to prevent vehicle access to forbidden areas and as a sacrificial barrier to other fixed assets for the prevention of damage.

All sets come complete with three posts, ready scalloped and drilled, supplied with galvanized bolts to suit. Standard post lengths are 1.2m long, with other lengths available to order.
Sets are available in the following diameters: 100-125mm and 125-150mm.

Lengths available are (i.e. the length of the top rail): 2.4m, 3.0m, 3.6m, 4.2m, 4.8m, 5.4m, and 6.0 meters long.

When you order park post and rail sets, you will need to consider the most appropriate diameter and length for your application.

Note: Top rails are not pre drilled as hole centers may vary causing misalignment on installation.

Scalloped Posts Are also sold separately for replacement work if required and are available to order in 1.5m and 1.8m lengths for non standard applications. If you have special requirements for scalloped posts, please enquire with our sales staff.

Note: we also supply a range of bagged cement products and auger bits to complete your job.