Lattice still remains one of the most cost effective ways of screening off, or creating privacy for those wide open areas. It will create the perfect environment for that favorite plant to climb, and add additaional privacy.

Lattice can also be used to fill in areas such as underneath your house (fixed to the stumps) or to screen off your wood shed! It's available in many different sizes, both external size and hole opening.

At Australian Treated Pine, our standard hole sizes are 60mm, with 40mm and woven type sheets available on request. We have compiled a list of standard sheet sizes that are available, with all non-stocked size sheets highlighted in yellow.

Alternatively, custom made sheet sizes are available should you require a specific external sheet size. (note that for special orders, you will be charged for the next standard size sheet, plus a surcharge. Dimensions will be within + or - 10mm of your requested sheet size). All Special orders must be paid for at the time of placing your order and are non refundable items.

For ease of installation, we also have a range of capping that will accommodate the lattice to give it support over long spans and to assist in preventing sagging. Our standard handrail profile will also accept lattice should you opt to use lattice as a baluster.

60mm hole opening Standard lattice sizes:
1.8x.6m	2.4x.6m	3.0x.6m	3.6x.6m	Non-Stock items
1.8x.9m	2.4x.9m	3.0x.9m	3.6x.9m
1.8x.1.2m	2.4x1.2m	3.0x1.2m	3.6x1.2m
1.8x.1.5m	2.4x1.5m	3.0x1.5m	3.6x1.5m
1.8x.1.8m	2.4x1.8m	3.0x1.8m	3.6x1.8m
	2.4x2.4m

Lattice cappings (with 20mm lattice rebate)
70x35mm
90x35mm
90x45mm

Handrail (with 20mm lattice rebate)

Colonial Handrail	90x45 mm	$9.90l/m
Tudor Handrail	90x45mm	$7.70l/m
Bottom Rail	70x35mm	$4.40l/m

Heavy Duty Lattice
Australian Treated Pine also stock a limited range of heavy duty lattice. Heavy Duty lattice is constructed of wider, thicker section of lathe, (the timber that lattice is constructed from. So, If you want a "chunky" look, or have higher loading requirements of your lattice, Heavy Duty may be the way to go.

Fence extensions
Fence extensions provide a quick cheap, and easy method of increasing the height of your existing fence.

There are two types of fence extension. The standard 70mm square hole opening, or for total privacy, the "woven type". The woven type of sheet as the name suggests, is interwoven pieces of lattice lathe that provide a total privacy.

All fence extensions are standard with 6 vertical uprights for installation to you existing fence structure. (note that depending on the exact type of design of your fence, some supports may require alteration or re positioning)

Sizes
60mm opening	2.4x.6m
Woven sheet.	2.4x.5m