Paling fencing is the type of fence typically used to define fence boundaries on residential properties. Paling fencing is available in several different heights, with the most common being 1.6m (or five foot six inches) and 1.9m (or Six foot six inches) in height. Fence heights available are: 1.6m, 1.9m, 2.2m, and 2.5m.

Paling fencing is usually sold as a complete package. Fence packages are priced per meter and work out cheaper as a package lot, rather than purchasing the individual items. We will supply your fence entirely in treated pine unless other wise stated.

So what do I receive when I purchase a fence package?
As mentioned, fencing is sold by the meter, so for every meter of fence, this includes:
3 x 75x50mm fence rails, 1 x 150x25mm plinth board, 5 x 100x12mm palings, 5 x 150x12mm palings, and one 125x75mm post for every 2.7metres of fence that you are building. All posts supplied will be 500mm longer than the specified height of the fence. I.e. your hole will be 500mm deep.

What else will I require?
You may require what we refer to as a “starting post”. This is in the case that you do not have an existing fence (or other structure) to attach to, and is normally one post per fence line. You may also require cement, this should be calculated at one 20kg bag per hole (recommended). You will also require nails. Depending on the method of nailing, (hand nailing or gun nailing) you will require nails to suit. We recommend that you hand nail your fence, this is a far more reliable way of ensuring your fixings are adequate. Either method definitely requires hot dipped galvanized nails or screws in treated pine. You may also elect, as a decorative finish you install a “fence capping” rail to the top of your fence. Fence cappings are quite an appealing look and also help to prevent water from penetrating your timber fence. Caution: if you are considering a fence capping, you will need to build your fence to suit the capping! If you will not be picking your fence order up yourself from our sales facility, a delivery charge will apply. Delivery charges vary depending on your requirements. Our sales staff will quote you on the delivery rate.
Please refer to our price list on this page for pricing information.

Picket fencing is commonly used for front fences, or display fencing. There are many different styles of picket fencing; rise and fall pickets, straight line pickets, pickets that form an arch ect ect. The most common type of picket profile is the “Windsor top” picket. This is our stock line. If you would like a different shape picket, or wish to match an existing profile we are able to manufacture these to order. Prices for special picket orders depend on quantity and shape.
Picket end section size is 70x20mm. Pickets are available in the following lengths: .900m, 1.2m, 1.5m, 1.8m, 2.1m and 2.4 metres in length. Pickets are normally spaced at 20mm, or the thickness of one picket. Always ensure that you pre drill your pickets prior to nailing or screwing (galvanized screws are recommended, 2 per fixing point), this will prevent your timber from splitting. Please refer to price list for pricing information
Turned top posts are a very complementary way of building your picket fence. Turned top posts are posts that include a post and a capitol top all in one. Turned top posts are available in the following end sections: 90x90mm, 120x120mm and 140x140mm square. Lengths are: 1.5m, 1.8m, 2.1m, 2.4m, 2.7m and 3.0m long. The turned top posts you select should be 600mm longer than the length of the picket you intend to use. E.g. A 900mm picket, would require a 1.5 meter long turned top post. Turned top posts are available with either Windsor top, or ball top. Please refer to price list for pricing information
Post Capitols will help you achieve the turned top post look after you have built your fence. Post capitols can be fitted to pre existing fencing, or even to your proposed fence project. Post capitols are available in the following diameters: 90mm, 120mm,140mm and 190mm. Our stock profiles are Windsor and ball, however, we can custom make post capitols to your requirements. Please refer to price list for pricing information.
Sound Attenuation Fencing has long been a specialty of Australian Treated Pine. One of Melbourne’s first to supply both sawn timber and plywood type sound proof fencing, we have completed jobs such as the South Eastern Arterial (Monash Freeway), the Eastern Freeway, the Hallam By-Pass, Western Ring Road and the Westgate Freeway. We have also supplied many private contractors’ requirements. If you have a large or small sound attenuation fence requirement, we stock both rebated boards (for the old method), or plywood panels for the modern style of sound attenuation fencing. Please contact our sales team for a quotation of your requirements.