Bollards, round & square

Domed bollards produced from perfectly rounded poles, so they too are consistent in diameter from one end to the other. As the name suggests, domed bollards have the tops rounded over in the shape of a dome. They are treated to H4 (see technical information page of this site for further information on hazard levels) for ground contact applications and are commonly used as a form of marker post, or to define boundaries in car parks, parks and gardens, driveways, jetties, piers, and as a sacrificial marker as to prevent damage to property.
Lengths available are 1.2/1.5/1.8 and 2.4 meter lengths. Longer lengths are also available, prices are on application.
Diameters available are 100mm, 125mm, 150mm and 200mm. Larger diameters are also available for special orders, please enquire if your requirements are larger than 200mm diameter.

In addition to supplying bollards, we also provide a range of services such as hole drilling, routing, docking ect. Please refer to the “additional services” page of this website for further information on these services.

Square bollards are also avaible and come in a range of sizes in both Treated Pine and Cypress Pine. Square bollards can simply be a plain piece of timber used as a marker, or can have such custom works as Dressing, routing (grooves machined), chamfering, holes drilled, pyramid tops, frangible saw cuts or many other custom made features to suit your needs.
Typical sizes are 100x100mm, 125x125mm, 150x150mm & 200x200mm end section sizes.
Lengths are typically 1.2, 1.5,1.8,2.1 & 2.4 meters, however, longer lengths and larger end section sizes are available. Please enquire with our sales team if you have special requirements.

Square bollards are normally made to order and we can work off a customer supplied diagram to ensure we meet your specifications.

Note. Any custom machined bollards are to be paid for prior to works being undertaken and are strictly non refundable items.

Bollard Sleeves are available for bollards both round and square. It is common where access (or limited access is required) in public areas to use a removable bollard. We stock a wide range of removable bollard sleeves for both round and square type bollards. All sleeves include a hasp and staple for padlocking. All sleeves are hot dipped galvanized to ensure durability and are ready to cement into application. Should you have a non standard sleeve requirement, we are able to custom manufacture a sleeve to fit your requirements.


Custom made Cypress bollards, Pyramid top with through holes, 150x150mm, square. Located Melbourne Zoo

Custom manufactured treated Pine domed Bollard, 250mm diameter. Located at Mill Park Lakes Estate

Custom manufactured domed bollard, treated pine, 200mm diameter. Located St. Kilda Marina, Melbourne

Removable bollard sleeve in use

Samples of additional services works provided for bollards